BWM416E Cost-Effective Digital Single Axis Inclinometer High Level
EMC Protection Structural Deformation Monitoring
Introduction:
BWM416E is a cost-effective single-axis inclinometer developed and
produced by Bewis Sensing, which adopts MEMS technology and Digital
output. It has a measurement range of ±180°, the highest accuracy
of 0.01°, and an operating temperature of -40°C to +85°C.This
product has high long-term stability, low temperature drift, simple
use, and strong ability to resist external interference. It is a
recommend choice to be used for surveying and mapping, industrial
automation and other industries.
Performance Index:
Measurement Range (°) | Condition | ±180 |
| Measurement axis | | X |
| Accuracy (°) | Room temperature | 0.01 |
| Resolution (°) | Completely still | 0.001 |
| Zero bias (°/℃) | -40~85℃ | ±0.005 |
| Start-up time | | ＜3s |
| Output frequency (Hz) | 5-100Hz adjustable | Up to 100 |
| ESD | IEC 61000-4-2 IV | Contact discharge 8KV, air discharge 15KV |
| EFT | IEC 61000-4-2 IV | Repetition frequency 5kHz, the positive and negative poles of the
power supply 4KV, the signal line is 2KV |
| Surge Immunity | IEC 61000-4-2 IV | Positive and negative poles of power supply, signal line; common
mode 4KV |
| Mean time between failures MTBF | ≥90000h |
| Electromagnetic compatibility | According to GBT17626 |
| Insulation resistance | ≥100 MΩ |
| Impact resistance | 2000g,0.5ms,3 times/axis |
BWSENSING's Accuracy Traceability System:
Company introduction
Wuxi Bewis Sensing Technology LLC(BWSENSING) is an innovative fast
growing company established in 2010. The company was born in The
Institute of Microelectronics (IME) of Peking University. We have
achieved the top spot in the middle and high-end industry
applications in the Chinese market.
From 2019, BWSENSING ® is approved as our global brand.With 10
years experience in the research-design-development and manufacture
of a range of Inertial sensor technology, BWSENSING posses the
skills, knowledge and experience to provide fully integrated
OEM/ODM design and manufacturing services for Inclinometer,
Electronic Compass, IMU, AHRS, GNSS/INS and Fiber Optic Gyroscope.
As the company co-founder Dr. Guangyi Shi said, we will use the
Accurate and Cost-effective sensors to make a greater contribution
to the global society for a better IoT world.
FAQ
Q1: Accuracy definition of products
A: RMS accuracy, the accuracy of each product can be
traced.Accuracy test report can be provided if required.
Q2: How to select suitable model?
A: Users should check the following points:
a. Single or dual axis?
b. Commom protocol, Modbus or CAN?
c. Dynamic or static Application scenarios?
d. Horizontal or vertical installation?
Q3: How to purchase?
A: If you want sample, please purchase on BWSENSING online shop. We
accept Paypal/TT/CC.If you purchase in bulk, it is recommended to
consult the sales for the best price.
Q4: How long is the warranty period?
A: One year.
